=

AST RESEARCH, INC.       TECHNICAL BULLETIN # 1083                   3-3-95

=


			 ASCENTIA 900N AND NETWORK GENERAL SOFTWARE


PROBLEM
Some Ascentia 900N systems may not recognize the Ethernet network card 
properly.  The system may report the following error message:

	"Address in configuration does not match the adapter."

CAUSE
There is a configuration error.

SYSTEMS AFFECTED
AST PART NUMBER AND DESCRIPTION

501299-2XX     ASCENTIA 900N 4/50 CS10
501300-3XX     ASCENTIA 900N 4/50 CT9
501302-2XX     ASCENTIA 900N 4/75 CS10
501304-3XX     ASCENTIA 900N 4/75 CT10

SOLUTION
Install the Network General software on the Ascentia 900N system by selecting 
the Toshiba 3100 (Japanese) system and set the RAM address to D4000.  
Using an editor program such as DOS edit, reflect these changes in the 
CONFIG.SYS and ENSNIFF.MNU files located in the CONFIG directory for the 
Network General Software.